Description
It operates with an input voltage of 380/400 VAC (3P + N + G) with a tolerance of ±20% (415 VAC optional with +15% / -25%), frequency of 50/60 Hz ±5%, input power factor ≥0.99, and THDi ≤3%. The bypass voltage is 380/400 VAC (3 Phase + N, 4 wires) with voltage distortion ≤10%, supported by comprehensive protections including fuses, voltage and frequency tolerance, input power limit, and phase sequence indicator. On the output side, it delivers 380/400 VAC (3P + N) with ±1% regulation (415 VAC optional), frequency of 50/60 Hz, frequency tolerance of ±2% in synchronized mode and ±0.1% in free-running mode, efficiency up to 93%, crest factor of 3:1, and voltage THD <3% at 100% linear load. The system supports overload conditions of 100–125% for 10 minutes, 125–150% for 1 minute, and >150% via bypass, with advanced protections such as short circuit, voltage tolerance, DC balance, regenerative load handling, and current limiting. The battery system is compatible with VRLA AGM, GEL, or NiCd types, with a nominal voltage of ±312 VDC (2×26 batteries), float voltage of ±351 VDC, end-of-discharge voltage of 260 VDC, and external battery cabinet configuration, operating at 25°C with protections including battery fuses, charging current limit, and optional temperature compensation; recharge time is typically 72 hours (adjustable). The unit complies with EN62040-1, EN62040-2, and EN62040-3 standards, features a 4-line LCD interface, RS232 communication ports, optional dry contacts, and monitoring software support. It operates within 0°C to 40°C, up to 90% non-condensing humidity, <1000 m altitude, IP20 protection rating, acoustic noise <68 dBA, with dimensions of 1770x825x855 mm and a weight of approximately 539 kg.
Termasuk Baterai, Boks Baterai dan Jumper | Tanpa Kabel In/Out | Tanpa Panel In Out | Tanpa Kabel BC
