Description
It operates with an input voltage of 380/400 VAC (3P + N + G) with a tolerance of ±20% (415 VAC optional with +15% / -25%), frequency of 50/60 Hz ±5%, input power factor ≥0.99, and THDi ≤3%. The bypass voltage is 380/400 VAC (3 Phase + N, 4 wires) with voltage distortion ≤10%, supported by protections including fuses, voltage and frequency tolerance, input power limit, and phase sequence indicator. On the output side, it delivers 380/400 VAC (3P + N) with ±1% regulation (415 VAC optional), frequency of 50/60 Hz, frequency tolerance of ±2% in synchronized mode and ±0.1% in free-running mode, efficiency up to 93%, crest factor of 3:1, and voltage THD <3% at 100% linear load. The system supports overload conditions of 100–125% for 10 minutes, 125–150% for 1 minute, and >150% via bypass, with advanced protections such as short circuit, voltage tolerance, DC balance, regenerative load handling, and current limiting. The battery system supports VRLA AGM, GEL, or NiCd types, with a nominal voltage of ±312 VDC (2×26 batteries), float voltage of ±351 VDC, end-of-discharge voltage of 260 VDC, and external battery cabinet configuration, operating at 25°C with protections including battery fuses, charging current limit, and optional temperature compensation; recharge time is typically 72 hours (adjustable). The unit complies with EN62040-1, EN62040-2, and EN62040-3 standards, features a 4-line LCD interface, RS232 communication ports, optional dry contacts, and monitoring software support. It operates within 0°C to 40°C, up to 90% non-condensing humidity, <1000 m altitude, IP20 protection rating, acoustic noise <68 dBA, with dimensions of 1770 × 825 × 855 mm and a weight of approximately 910.5 kg.
Termasuk Baterai, Boks Baterai dan Jumper | Tanpa Kabel In/Out | Tanpa Panel In Out | Tanpa Kabel BC
